previous vectron model numbers tc-200 frequency range 311.04 mhz ? 777.6 mhz standard frequencies 311.04, 622.08, 625.00, 644.5313, 666.5143, 669.3266, 777.6 mhz parameter min typ max units operating temp range vs. operating temperature range (referenced to +25c) -4.1 +4.1 ppm -40 ? +85c options 5 -4.1 +4.1 ppm 0 ? +70c parameter min typ max units condition initial tolerance -5.0 +5.0 ppm @ +25c total stability <20 ppm all causes vs. supply voltage change -0.2 +0.2 ppm v s 5% jitter generation <1 ps 12 khz to 80 mhz aging <10 ppm for 10 years tx-190 temperature compensated crystal oscillator frequency stabilities 1 sonet minimum clock true sonet minimum performance ultra low jitter complementary pecl output features typical applications http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 tx-190
parameter min typ max units condition supply voltage 3.135 3.3 3.465 vdc options 5 supply voltage 4.75 5.0 5.25 vdc current 200 ma parameter min typ max units condition signal [standard] complementary pecl load 15 pf signal level (vol) vcc - 1.63 v vdc signal level (voh) vcc vdc rise/fall time 400 ps (20% to 80%) duty cycle 45 55 % @ vcc - 1.3 v parameter min typ max units condition tuning range 40 ppm 0 to vcc tuning slope positive slope frequency tuning (efc) rf output supply voltage (vs) http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100
type c1 code: height ?h? pin length ?l? a1 6.35 n/a pin con? guration 1 electrical frequency adjust; 0 to vcc. or no connect 9 vcc - supply voltage 2 ground 10 lock detect 3 missing 11 ground 4 missing 12 output signal - q 5 missing 13 ground 6 missing 14 comp output signal - q 7 ground 15 ground 8 vcc - supply voltage 16 enable / disable floating = enabled logic ?0? = disabled http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 enclosure
use this worksheet to forward the following information to your factory representative : model height - supply voltage code rf output code temperature range - stability frequency control - frequency tx-190 0 - e c t - 416 1 - 622m080000 notes: 1 contact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modi? cation. 5 contact factory for availability. how to order this product: stability code: 416: 4.1ppm supply voltage: d: 5 v e: 3.3 v temperature range: e: -40...+85c t: 0...+70c freq. adjust option: 1: electrical freq. adjust height: 0: 6.35 mm rf output code: c: pecl package: 190: (type c1) http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100
|